We provide the complete solution for compressed air production and purification system and also recommend suitable filtration systems as per industrial requirements and standards.

We provide the automation solutions by using Pneumatic and Hydraulic systems.

A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas.

A combustion inducer blower is a unit used in heating, ventilating and air conditioning equipment such as furnaces. The inducer blower draws air through the furnace’s combustion passageway to promote a more efficient running of the combustion, and to allow thorough heat transfer.

A combustion inducer blower is a unit used in heating, ventilating and air conditioning equipment such as furnaces. The inducer blower draws air through the furnace’s combustion passageway to promote a more efficient running of the combustion, and to allow thorough heat transfer.

Forced Draft Fan is a type of a fan supplying pressurized air to a system. … And this requirement is compensated by a Forced Draft Fan. FD fan supplies air to the Air-pre heater, where it captures the heat from the flue gases coming from the Boiler Outlet.

Primary air fan is used to transport the pulverized coal from mills to the furnace area. So its main function is the carry the fuel to the furnace for the combustion.

Secondary Air Fans. Secondary air, on the other hand, is generally provided to compensate for the primary air that went un reacted. It is generally said to be an extra air that must be provided for complete combustion of fuel. Secondary air is generally provided through the nozzles installed on the walls of the furnace.

A dump-grate stoker is considered to be the type wherein ash is removed from the fuel bed in granular form by manually or mechanically dumping or tilting the dump grates at intervals.

A type of furnace stoker; coal feeds by gravity into a hopper located on top of one end of a moving (traveling)grate; as the grate passes under the hopper, it carries a bed of fresh coal toward the furnace.

Atmospheric fluidized beds use limestone or dolomite to capture sulfur released by the combustion of coal. Jets of air suspend the mixture of sorbent and burning coal during combustion, converting the mixture into a suspension of red-hot particles that flow like a fluid. These boilers operate at atmospheric pressure.

A fire grate in which the bars rise like steps.

A soot blower is a device for removing the soot that is deposited on the furnace tubes of a boiler during combustion and prevent plugging of gas passes and maintain boiler efficiency.

Storage tanks are containers that hold liquids, which is not typically labeled or regulated as a storage tank or mediums used for the short- or long-term storage of heat or cold.

A refrigerated container or reefer is an intermodal container used in intermodal freight transport that is refrigerated for the transportation of temperature-sensitive cargo.

A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure. Pressure vessels can be dangerous, and fatal accidents have occurred in the history of their development and operation.

What is a heat exchanger? Suppose you have a gas central heating furnace (boiler) that heats hot-water radiators in various rooms in your home. It works by burning natural gas, making a line or grid of hot gas jets that fire upward over water flowing through a network of pipes.

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heaat-exchanger, typically a type of radiator known as an oil cooler.

An oil heater, also known as an oil-filled heater, oil-filled radiator, or column heater, is a common form of convection heater used in domestic heating.

Primary air fan is used to transport the pulverized coal from mills to the furnace area. So its main function is the carry the fuel to the furnace for the combustion.

A surface condenser is a commonly used term for a water-cooled shell and tube heat exchanger installed on the exhaust steam from a steam turbine in thermal power stations. These condensers are heat exchangers which convert steam from its gaseous to its liquid state at a pressure below atmospheric pressure.

A steam header at the boiler house provides a useful centralised starting point. It provides an extra separating function if the boiler separator is overwhelmed, and ameans of allowing the attached boilers to share the distribution system load.

The term wet scrubber describes a variety of devices that remove pollutants from a furnace flue gas or from other gas streams. In a wet scrubber, the polluted gas stream is brought into contact with the scrubbing liquid, by spraying it with the liquid, by forcing it through a pool of liquid, so as to remove the pollutants.

a conveyor is a continuously-moving strip of rubber or metal which is used in factories for moving objects along so that they can be dealt with as quickly as possible.

A screw conveyor or auger conveyor is a mechanism that uses a rotating helical screw blade, called a “flighting”, usually within a tube, to move liquid or granular materials. They are used in many bulk handling industries.

A mechanism for handling bulk (pulverized or granulated solids) materials, in which a rotating helicoid screw moves the material forward, toward and into a process unit.

Drum feeders are used to feed, sort and orient parts in pick and place and other automated applications. They are effective disentanglement systems that provide an alternative to vibratory bowl feeders for small, unstable components such as springs or bent tubes that can easily become tangled.

A typical spreader-stoker boiler consists of a variable-feeding device, a mechanism for “throwing” coal into the boiler, and one or more grates, depending on capacity, with suitable openings for admitting combustion air.

The bucket conveyors are used to move bulk materials in a vertical or inclined path. Buckets are attached to a cable, chain.

A bucket elevator, also called a grain leg, is a mechanism for hauling flow-able bulk materials (most often grain or fertilizer) vertically.

A container with a lid on top to store material. The bin could mean very large container

Ash-carrier is a simple yet invaluable addition to your Boiler. It offers a clean, safe and effective means of ash disposal. It enables hot ashes to be emptied straight from the Boiler into the carrier where they can be stored and left to cool safely.

Rotary feeders, also known as rotary airlocks or rotary valves, are commonly used in industrial and agricultural applications as a component in a bulk or specialty material handling system. … Components of a rotary feeder include a rotor shaft, housing, head plates, and packing seals and bearings.

A flue-gas stack is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air.

A container for a loose bulk material such as grain, rock, or rubbish, typically one that tapers downward and is able to discharge its contents at the bottom.

In dairy farming a bulk milk cooling tank is a large storage tank for cooling and holding milk at a cold temperature until it can be picked up by a milk hauler. The bulk milk cooling tank is an important piece of dairy farm equipment.

Industrial agitators are machines used in industries that process products in the chemical, food, pharmaceutical and cosmetic industries

A chemical reactor is an enclosed volume in which a chemical reaction takes place. In chemical engineering, it is generally understood to be a process vessel used to carry out a chemical reaction

A silo is a structure for storing bulk materials. Silos are used in agriculture to store grain or fermented feed known as silage. Silos are commonly used for bulk storage of grain, coal, cement, carbon black, woodchips, food products and sawdust.

An overhead crane, commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge.

A simple roofed structure used for garden storage, to shelter animals, or as a workshop.

Within industry, piping is a system of pipes used to convey fluids from one location to another. The engineering discipline of piping design studies the efficient transport of fluid.

Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section.

A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. It is distinguished from air purifiers, which use disposable filters to remove dust.

A refractory material or refractory is a heat-resistant material, e.g. a mineral that is resistant to decomposition by heat, pressure, or chemical attack, most commonly applied to a mineral that retains strength and form at high temperatures.